Latest 3-D Printer Models and Brands in the Market 2009
(1 votes, average: 2.00 out of 5)
Loading ...There are many different 3-d printer models available in the market these days. However, if you are thinking of buying any of these, you need to exercise caution especially since not all them have the standard of quality you are expecting.
Alaris 30
This is a 3-d printer from Objet Geometries. Even though the brand appears to be quite nascent in the 3-d printer segment, it already captured a significant share across the North American niche. Using two different printheads moving along one rail building with thin material layers, this 3-d printer is not just super fast but also extremely accurate.
Features
With high-resolution image quality at around 600 x 600 dots per inch, the building materials are made of polymers. Thus, the finishing of the resultant objects is smooth and gorgeous to look and feel. The support material is of a gel-like consistency and you can easily remove it with your hand or using water jet mechanisms. In this manner, you get to build very complex geometries even with the presence of very thin walls.
Rapid tooling mechanisms
The inbuilt parts are strong sufficiently to facilitate rapid tooling especially for materials such as silicone. You can also use the 3-d printer model for function testing, form, fit, as well as vacuum forming mechanisms. You could even pass wires through these parts, drill some holes inside these, paint the exteriors and many other similar functions.
Office friendly
This 3-d printer model is one of those few three-dimensional models, which also boasts compatibility with office environments. With a total weight of around 183 pounds and dimensions of 32 x 24 x 23 inches, you could easily place this amazing 3-d printer on any small rectangular table in the office. Thus, this 3-d printer model has a dual advantage of being portable and user-friendly as well.
No special facilities needed
What makes the Alaris30 even better is that you do not need to provide any special facilities or special kind of wiring to get this 3-d printer started. All you need is a sink so you can wash all support materials. All these materials are non-messy and come packed in neat and tightly sealed cartridges. The 3-d printer model comes readily compatible with your existing TCP/IP network or LAN networks in the office. You can also use the inbuilt software to convert all your CAD files into STL formats. With a price of under 40,000 US dollars, this one is truly a steal.
ZPrinter 650
The other contender for the best ones among the 3-d printer model segment is the ZPrinter 650. It has been specifically designed to cater to demanding educational as well as commercial environments. With amazing print speeds, highest throughput, large models, best color outputs, high resolution and ease of use, this 3-d printer model is undoubtedly among the few best 3-d printers out there.
With one of the biggest build chambers compared to so many other 3-d printers in the segment, you get spectacular and large images.
Subscribe Now!
August 24th, 2009 at 4:54 pm
[...] on what your requirements are and the kind of 3-d printing system models you need, you can choose an appropriate model. There are many different kinds of software for [...]
August 24th, 2009 at 4:59 pm
[...] Software is used for transforming existing CT scans into a 3-d model and this is diverted to the 3-d printer. Fine powder layers are poured into concentric layers producing a new 3-d [...]
August 24th, 2009 at 5:01 pm
[...] realm and scope of 3-d printers and associated printing is applicable in several segments. These range from metal casting, [...]
February 1st, 2010 at 12:59 am
[...] contributor of Office Supplies Information & Resources. More information on the subject is at Latest 3-D Printer Models and Brands in the Market 2009, and related resources can be found at Lexmark Printer Ink Cartridge. Article [...]
February 18th, 2010 at 8:53 pm
[...] printers. Make certain we check with your impending businessman if a use includes warranty. Most 3-d printer manufacturers these days, during slightest a conjectural ones, suggest a great warranty. If your 3-d printer [...]
February 25th, 2010 at 1:05 am
[...] contributor of Office Supplies Information & Resources. More information on the subject is at Latest 3-D Printer Models and Brands in the Market 2009, and related resources can be found at Lexmark Printer Ink [...]
February 27th, 2010 at 3:46 pm
[...] contributor of Office Supplies Information & Resources. More information on the subject is at Latest 3-D Printer Models and Brands in the Market 2009, and related resources can be found at Lexmark Printer Ink [...]
February 27th, 2010 at 5:34 pm
[...] Software is used for transforming existing CT scans into a 3-d model and this is diverted to the 3-d printer. Fine powder layers are poured into concentric layers producing a new 3-d [...]
February 28th, 2010 at 5:14 am
[...] realm and scope of 3-d printers and associated printing is applicable in several segments. These range from metal casting, [...]
March 4th, 2010 at 9:49 pm
[...] realm and scope of 3-d printers and associated printing is applicable in several segments. These range from metal casting, [...]
March 7th, 2010 at 12:47 am
[...] contributor of Office Supplies Information & Resources. More information on the subject is at Latest 3-D Printer Models and Brands in the Market 2009, and related resources can be found at Lexmark Printer Ink [...]
March 31st, 2010 at 9:45 am
[...] Software is used for transforming existing CT scans into a 3-d model and this is diverted to the 3-d printer. Fine powder layers are poured into concentric layers producing a new 3-d [...]
April 25th, 2010 at 2:19 pm
[...] Software is used for transforming existing CT scans into a 3-d model and this is diverted to the 3-d printer. Fine powder layers are poured into concentric layers producing a new 3-d [...]
May 11th, 2010 at 12:13 am
[...] Software is used for transforming existing CT scans into a 3-d model and this is diverted to the 3-d printer. Fine powder layers are poured into concentric layers producing a new 3-d [...]
May 14th, 2010 at 8:22 am
[...] contributor of Office Supplies Information & Resources. More information on the subject is at Latest 3-D Printer Models and Brands in the Market 2009, and related resources can be found at Lexmark Printer Ink [...]
May 15th, 2010 at 6:01 pm
[...] Software is used for transforming existing CT scans into a 3-d model and this is diverted to the 3-d printer. Fine powder layers are poured into concentric layers producing a new 3-d [...]
June 5th, 2010 at 9:35 am
[...] Software is used for transforming existing CT scans into a 3-d model and this is diverted to the 3-d printer. Fine powder layers are poured into concentric layers producing a new 3-d [...]
June 5th, 2010 at 12:03 pm
[...] realm and scope of 3-d printers and associated printing is applicable in several segments. These range from metal casting, [...]
June 6th, 2010 at 4:25 pm
[...] realm and scope of 3-d printers and associated printing is applicable in several segments. These range from metal casting, [...]
June 14th, 2010 at 12:13 am
[...] Software is used for transforming existing CT scans into a 3-d model and this is diverted to the 3-d printer. Fine powder layers are poured into concentric layers producing a new 3-d [...]
July 2nd, 2010 at 12:57 am
[...] realm and scope of 3-d printers and associated printing is applicable in several segments. These range from metal casting, [...]
July 5th, 2010 at 1:19 pm
[...] Software is used for transforming existing CT scans into a 3-d model and this is diverted to the 3-d printer. Fine powder layers are poured into concentric layers producing a new 3-d [...]
July 5th, 2010 at 11:18 pm
[...] Software is used for transforming existing CT scans into a 3-d model and this is diverted to the 3-d printer. Fine powder layers are poured into concentric layers producing a new 3-d [...]
July 7th, 2010 at 5:46 pm
[...] is used for transforming existent CT scans in to a 3-d indication as good as this is diverted to a 3-d printer. Fine powder layers have been poured in to concentric layers producing a ultimate 3-d [...]
July 22nd, 2010 at 4:54 pm
[...] Software is used for transforming existing CT scans into a 3-d model and this is diverted to the 3-d printer. Fine powder layers are poured into concentric layers producing a new 3-d [...]
July 22nd, 2010 at 4:54 pm
[...] Software is used for transforming existing CT scans into a 3-d model and this is diverted to the 3-d printer. Fine powder layers are poured into concentric layers producing a new 3-d [...]
August 1st, 2010 at 4:12 pm
[...] Software is used for transforming existing CT scans into a 3-d model and this is diverted to the 3-d printer. Fine powder layers are poured into concentric layers producing a new 3-d [...]
August 3rd, 2010 at 1:17 pm
[...] area as good as operation of 3-d printers as good as compared copy is germane in multiform segments. These operation from steel casting, [...]